Shelf runners
The runners inside the oven can be
washed by hand or in the dishwasher.
Any discolouration or limescale
deposits can be removed easily with
the Miele ceramic and stainless steel
hob cleaner (see "Optional
accessories"). Rinse the runners
thoroughly with clean water to remove
any residual cleaning agent.
To remove the runners
^
Loosen fixing screws a just as much
as required to be able to remove the
runners.
It is not possible to remove the
screws completely.
To replace the runners
^ After cleaning, re-fit the runners by
placing the runner with the guide b
(at the front of the middle runner)
onto the loosened fixing screw.
^
Fit the eyelet, located at the rear of
the middle runner, over the protuding
pin c in the rear wall of the cooking
compartment.
^
Tighten the screws again.
Cleaning and care
44
To Next Page
Loading...
Need help?
General
