Programme option* Status** Setting
P1 Buzzer volume S 00 Very quiet
S 01 Quiet
S 02 Medium
S03Loud
P2 Audible tone at end of
programme
S 00 Single beep
S01Beeps for a short time
S 02 Beeps for 5 minutes
P3 Safety lock S00Not possible
S 01 Possible
P4 Programme in display after
switching on
S00Steam with pressure
S 01 Steam without pressure
S 02 Reheat
S 03 Defrost
S 04 Last programme selected
P5 Water hardness S 01 Soft
S 02 Medium
S 03 Hard
S04Very hard
P6 Location (altitude) S00Below 1000 m
S 01 Above 1000 m
P7 Altering the temperature S00In 5° increments
S 01 In 1° increments (note that
when warming up, the
temperature of the appliance
will continue to be shown in
5° increments)
P8 Demonstration mode and
factory default settings
S 00 Demonstration mode on
S01Demonstration mode off
S 09 Factory default settings
reinstated
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
49
To Next Page
Loading...
Need help?
General
