Miele DG 5061 User Manual

Pre-heat
Your appliance has a pre-heating function. This heats the
oven interior to approx. 40 °C. The heating-up time is then
shorter as the oven interior is pre-heated and therefore the
cooking process takes less time.
The appliance is delivered with the pre-heating function
deactivated. If you wish to use it you will need to alter the
setting (see "Settings / Pre-heat").
When the pre-heat function has been activated you can still
choose whether you want to use it for each programme.
The water container must be filled with water for
pre-heating.
The pre-heating process is cancelled by
- Opening the door.
- Touching the ;, ? sensors or "OK".
- Selecting a different function.
You can start the process again by switching the appliance
off and back on again and then selecting a function.
Using pre-heat
^
Select the function you want.
Do not enter a duration.
The pre-heating process will begin after a few seconds.
When the correct temperature has been reached,
"Programme finished" will appear in the display.
^
Place the food in the oven.
^
Set the temperature and duration as normal.
Not using pre-heat
^
Place the food in the oven.
^
Select the function you want.
^
Set the required duration.
^
Confirm this or set the required temperature.
Additional functions
32

Miele DG 5061 Specifications

General

Total oven(s) interior capacity	30 L
Timer type	Digital
Auto-off timer cooks food safely	Yes
Control type	Sensor
Product color	Stainless steel
AC input voltage	230 V

Weight and Dimensions

Depth	500 mm
Width	560 mm
Height	448 mm
Weight	24500 g