Cleaning and care
147
Cleaning the shelf runners
The surfaces of the shelf runners
have been treated with PerfectClean.
Please see “Cleaning and care -
PerfectClean” for instructions on
cleaning.
Risk of injury caused by hot
surfaces.
The steam oven gets hot during
operation. You could burn yourself
on the heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before removing the shelf
runners.
Pull the shelf runners out of the
holder (1.) at the front of the oven and
then pull them out of the oven (2.).
Remove:
– light soiling with a clean sponge and
a solution of washing-up liquid and
warm water.
– stubborn soiling with a clean
washing-up sponge, hot water and a
little washing-up liquid. If necessary,
you can also use the rough side of
the sponge.
After cleaning, wipe the surface with
clean water to remove any cleaning
agent residues.
Then dry the shelf runners with a
cloth.
Refit in the reverse order.
Refit the shelf runners carefully.
If the shelf runners are not correctly
inserted, there is no anti-tip
protection. The temperature sensor
could also be damaged when
cooking containers are placed in the
steam oven.
To Next Page
Need help?
General
Weight and Dimensions
