^ Pour liquid rinse aid into the reservoir
until it its visible on the surface of the
screen.
The rinse aid reservoir holds approx.
3.7 oz (110 ml) of liquid.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
To optimize the wash result, the rinse
aid dosage can be adjusted. See
"Settings J - Rinse aid".
Rinse aid indicator
When the Refill rinse aid message first
comes on, there will be enough rinse
aid left for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
If the "2 in 1" or "3 in 1" function is
selected, the
Refill rinse aid will not
come on.
See "Settings J - Detergent".
^ Confirm with
OK.
The indicator light will go out.
Before using for the first time
17
To Next Page
Loading...
Need help?
General
