General problems with the dishwasher
Issue Possible fault Solution
The display remains
off.
The display has gone
into "Standby" mode to
save energy.
Press a button.
The display turns on again.
The buzzer sounds
during the program
and the display
shows:
Close the salt container
lid
The salt container lid
was not screwed on
properly.
– Close the salt container lid.
If the salt container lid opened
during a running program,
you should also:
– Turn the dishwasher off and
on again with the o button.
– Restart the program.
The display shows the
following:
Middle spray arm
blocked
or
Lower spray arm blocked
The middle or lower
spray arm is blocked by
dishware.
Open the dishwasher door
and rearrange items blocking
the spray arms.
The spray arm jets of
the middle or lower
spray arm are clogged.
– Turn the dishwasher off o.
Then:
– Clean the spray arms. See
"User Maintenance
Instructions".
Frequently asked questions
53
To Next Page
Loading...
Need help?
General
