Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required follow the
instructions below.
^
Open the appliance door.
^ Remove cover a by hand, and
remove cover b using a screwdriver.
^
Loosen fixing screws c slightly.
^
Slide the door outwards to the right
d, and lift it off.
^
Unscrew fixing screws c completely,
and loosely screw them into the holes
on the opposite side of the appliance
e.
^ Unscrew and remove screws a.
Do not close up the hinges. Danger
of injury.
^ Replace the hinges in their diagonally
opposite corners b.
^ Cover the holes using the plugs
supplied c.
Changing the door hinging
33
To Next Page
Loading...
Need help?
General
