With the aid of the following guide, faults in the performance of the appliance,
some of which may result from incorrect operation can be put right without
contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem Possible cause Remedy
No indicator lights are
lit up or flashing.
The appliance is not
plugged in.
Insert the plug and switch
on at the socket.
The fuse has tripped. Reset or replace the fuse.
(Minimum fuse rating - see
data plate).
The dishwasher does
not start after the
J / M button has
been pressed.
The programme selector is
not pointing to a
programme position.
– Turn the programme
selector to the required
programme.
– Press the J / M
button.
The dishwasher stops
during a programme.
The fuse has tripped. Reset or replace the fuse.
(Minimum fuse rating - see
data plate).
Problem solving guide
41
To Next Page
Loading...
Need help?
General
