Memory
The memory function allows you to save
the last selected program.
If you turn the dishwasher off and on
again after a program has finished or
open and close the door, the last
selected program is displayed instead
of the Economy program.
^
Press the K button to turn the
dishwasher off.
^
Press and hold the Start/Stop button
and simultaneously turn the
dishwasher on using the K button.
Keep the Start/Stop button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
If it does not come on, start over.
^ Press the Delay start button six times.
The Delay start indicator light shows 6
short flashes in intervals.
The flashing in the time display shows
whether Memory is turned on.
–
"p1": Memory is on.
–
"p0": Memory is off.
^
Press the Start/Stop button if you
wish to change the setting.
The setting is immediately saved.
^
Press the K button to turn the
dishwasher off.
Additional options
36
To Next Page
Loading...
Need help?
General
