Operation
52
Display of programme duration
The duration of the programme selected
appears in hours and minutes in the
display before the programme begins.
During the programme, the time left
until the end of the programme is
displayed.
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the
incoming water, the reactivation cycle
of the water softener, the detergent
type, the amount of crockery and how
soiled it is.
When a programme is selected for the
first time, the display will show the
average programme duration for a cold
water connection.
The programme durations shown in the
“Programme chart” refer to standard
test loads and temperatures.
Each time a programme is run, the
control module calculates the
programme duration depending on the
temperature of the water taken into the
dishwasher and the size of the load.
Starting a programme
Press the Startbutton.
The programme will start.
The Start indicator will light up
continuously.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so.
To Next Page
Loading...
Need help?
General
