Programme options
65
Extradry
You can select this programme option
in order to increase the programme
drying performance.
If you activate this programme option,
the programme running times and final
rinse temperatures will increase. The
energy consumption may increase.
If this function is activated, it will be
applied to all programmes until it is
deactivated.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least 4seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the programme selection
button 11 times.
The left programme indicator light will
emit 1 long flash and 1 short flash at
intervals.
The flashing sequence in the time
display indicates whether the Extradry
programme option is activated or not:
- : Extradry is activated
- : Extradry is deactivated
Press the Startbutton to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
To Next Page
Loading...
Need help?
General
