Operation
49
End of programme
The buzzers might sound at the end of
the programme.
The programme has ended when :
shows in the display.
In some programmes, if the AutoOpen
function is activated, the door will auto-
matically open slightly (see “Programme
options – AutoOpen”). This improves
the drying process.
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function (see
“Programme options – AutoOpen”),
and would like to open the door as
soon as the programme has finished,
make sure that you open the door
fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
To Next Page
Loading...
Need help?
General
