Programme options
65
Factory defaults
If you have altered any settings, you
can reset them back to the factory de-
fault settings.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the button pressed in for at
least 4seconds until the indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the programme selection
button 19 times.
The top left programme indicator light
will emit 1 long flash and 9 short flashes
at intervals.
The flashing sequence in the display in-
dicates whether the setting deviates
from the factory default:
- : All values are factory default set-
tings.
- : At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the button.
The setting is now saved.
Switch the dishwasher off with the
button.
To Next Page
Loading...
Need help?
General
