Switching on
Check whether the spray arms can
rotate freely.
Close the door.
Open the stopcock (if it is closed).
Press the “On/Off” button (14).
The “Start” indicator light (16) comes
on.
Starting a programme
When selecting a programme, refer to
the programme chart at the end of the
operating instructions.
Turn the programme selector (17)
clockwise or anti-clockwise to the re-
quired programme.
Press the “Start” button (16).
The programme cycle begins. The
“Start” indicator light (16) goes out and
the “Wash/Rinse” indicator light (15)
comes on.
Do not finish a programme prema-
turely. Important programme stages
(e. g. reactivating the water sof-
tener) could be omitted.
Programme sequence indicator
lights (15)
The “Wash/Rinse” indicator light comes
on in the Pre-wash, Main wash, Interim
rinse and Final rinse stages of a pro-
gramme.
The
“Drying” indicator light comes on
during the Drying stage of a pro-
gramme.
The
“End” indicator light comes on
when the programme has finished.
Operating the dishwasher
34
To Next Page
Loading...
Need help?
General
