To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Miele G 660 and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | G 660 |
| Category | Dishwasher |
| Language | English |
Details the three available Miele dishwasher models: freestanding, integrated, and built-under ("U").
Illustrates and labels the main components of the dishwasher, including baskets and spray arms.
Explains the function and layout of the dishwasher's control panel and its buttons.
Outlines the intended use of the dishwasher and general safety precautions to prevent injury.
Provides critical safety advice related to installation, electrical safety, and child supervision.
Lists precautions to avoid damaging the dishwasher and its contents, including detergent use and loading.
Details safety measures for handling dishwasher detergents, especially concerning children and proper use.
Explains the conditions for the Miele Waterproof System to offer protection against water damage.
Provides instructions on how to safely render an old dishwasher unusable before disposal.
Advises on recycling packing materials and old machines responsibly.
Offers advice on optimizing dishwasher use for water and electricity efficiency.
Covers essential steps before the first operation, like setting water softener and adding rinse aid.
Guides on proper crockery loading and selecting the right amount of detergent for optimal results.
Recommends choosing the appropriate programme for different load types and soiling levels.
Details the procedure for opening and closing the dishwasher door.
Explains how to use the child safety lock to prevent accidental door opening by children.
Instructs on adjusting the water softener selector in the wash cabinet based on local water hardness.
Provides step-by-step instructions for filling the salt reservoir with special dishwasher salt.
Explains the function of the salt indicator light and when to refill the salt reservoir.
Details the purpose of rinse aid and how it aids in drying and preventing spots.
Instructs on when to add rinse aid based on the control panel indicator light.
Guides on how to set the rinse aid dosage adjuster for optimal results.
Provides fundamental rules for loading crockery to ensure effective cleaning and prevent blockages.
Highlights key points for loading, such as inverting hollow items and avoiding spray arm obstruction.
Illustrates recommended loading patterns for the bottom and upper baskets and cutlery.
Shows the height restrictions for items placed in the lower basket to avoid obstructing the middle spray arm.
Details how to properly load cutlery in the basket or tray for best cleaning results.
Explains the use and fitting of spoon inserts for improved cleaning of cutlery.
Provides specific loading instructions for cutlery trays in SC model dishwashers.
Describes the purpose and use of the flap-up racks in the dishwasher baskets.
Explains how to use the positioning rail for easier crockery sorting and placement.
Details how to adjust the upper basket to accommodate different item heights and basket configurations.
Lists types of items that should not be washed in the dishwasher due to potential damage or poor results.
Provides specific advice regarding silver, aluminium, and glazed items to prevent discolouration or damage.
Discusses factors to consider when selecting dishwasher detergents, including new formulations.
Highlights potential issues like white deposits or etching caused by detergent choice.
Offers recommendations for using new detergent types and phosphate-free options.
Explains when to add detergent and recommended amounts for different programme types.
Shows the detergent compartments and how to fill them correctly.
Guides users on selecting programmes based on load type and soiling level, highlighting universal programmes.
Details universal programmes, their usage, and recommended detergent amounts.
Describes special programmes like Economy and Cold Pre-wash, including their applications.
Provides data on energy, water consumption, and time for each programme cycle.
Step-by-step guide on starting a wash cycle, including programme and temperature selection.
Advice on correcting errors when turning the programme selector switch past the start point.
Instructions on how to safely change programmes during an active cycle.
Details the procedure for ending a programme and turning off the appliance.
Explains how the programme selector indicates the current stage of the wash cycle.
Describes how to interrupt a programme and safely resume it after opening the door.
Guides on how to unload the dishwasher safely, including cooling time and unloading order.
Provides instructions on how to remove and clean the filter combination in the wash cabinet.
Details how to correctly reassemble and secure the filter combination after cleaning.
Explains how to remove and clean the middle and lower spray arms to ensure optimal water jet performance.
Guides on cleaning the drain pump and non-return valve to resolve drainage issues.
Details how to clean the filter at the water inlet to ensure sufficient water supply.
Recommends fitting an additional filter for mains water with insoluble substances.
Explains that the wash cabinet is generally self-cleaning with proper detergent use.
Provides instructions for cleaning the dishwasher door and its seal.
Offers guidance on cleaning the facia panel and the front of the dishwasher, including material-specific advice.
Explains how to check the water level and what dimension 'X' signifies for correct intake.
Details how to increase the water intake time if the water level is insufficient.
Lists common issues like white residue or water left in the cabinet and their potential causes.
Provides information on contacting Miele for assistance with persistent difficulties or under guarantee.
Describes the bottle holder and glass inserts for specialized loading needs.
Lists various accessories for specific installation situations like worktop fixing and decor panels.
Outlines the test standards and programme used for comparison, including detergent amounts.
Illustrates the loading of cutlery baskets with spoon inserts for comparison tests.
Illustrates the loading of cutlery trays for comparison tests.
Covers installation and levelling requirements for freestanding models.
Details how to fit decor frames and panels to match kitchen furniture for freestanding units.
Describes integrated dishwashers designed for under-worktop installation and decor set conversion.
Emphasizes the need to securely screw integrated dishwashers to a continuous worktop for stability.
Instructions for fitting the stainless steel coverplate to protect the underside of the worktop.
Guidance on connecting water and drainage services and cutting openings for hoses.
Explains the function of slides for easier installation and pushing the dishwasher into the recess.
Instructions for adjusting rear and front screw feet to ensure the dishwasher is level and stable.
Guides on attaching the decorative facia panel and switch knob to the dishwasher.
Explains how to adjust spacer bars to align the facia panel with adjacent kitchen drawer fronts.
Details on fixing the kitchen's door front to the dishwasher's outer panel.
Guides on marking, drilling, and positioning the fixing bracket on the rear of the door front.
Instructions for hanging and securing the fitted door front onto the dishwasher's outer panel.
Details how to adjust the door springs for balanced door opening and closing.
Explains how to fit securing pieces and screw the dishwasher to the worktop for stability.
Instructions for screwing the dishwasher to the worktop and adjacent kitchen units using special accessories.
Guides on cutting and fitting the plinth facia to match the kitchen run and ensure full door opening.
Details the electrical supply specifications and safety precautions for connecting the dishwasher.
Explains the colour coding of wires and how to connect them to the plug terminals correctly.
Provides safety information regarding non-rewireable plugs, fuse replacement, and socket suitability.
Details requirements for connecting to the water supply, including pressure and hose guidance.
Explains the correct vertical or horizontal connection of the water inlet hose with the 'Waterproof-System' valve.
Provides guidance on routing the water inlet hose, ensuring proper clearance and avoiding kinks.
Details the drainage system, hose extension, connection, and venting to prevent siphoning.
Lists key technical specifications including dimensions, power, and capacity.
