Cleaning the spray arms
On occasion particles of food may get
stuck in the spray arm jets. They can be
easily cleaned as follows:
^
Turn off the dishwasher.
^
Take out the cutlery tray
(if equipped).
^
Push up on the upper
spray arm to
engage the ratchet mechanism and
unscrew the spray arm.
^
To remove the middle
spray arm lo
-
cated beneath the upper basket,
gently push upwards until it engages
in the ratchet
b, and unscrew c.
^
Remove the lower basket.
^
Lift up on the lower
spray arm to re
-
move it.
^
To clean the spray arms, use a
pointed object such as a toothpick to
push the food particles into the jets.
^
Rinse under running water.
^
After cleaning, replace the spray
arms.
Important:
After replacing the spray arms,
check that they rotate freely.
Cleaning and care
43
To Next Page
Loading...
Need help?
General
