Options
60
Timer
You can set the start time of a pro-
gramme. The programme start time can
be delayed for between 30minutes and
24hours.
With start time delays between
30minutes and 3hours, the delay can
be set in 30minute stages. It is set in
hours for periods longer than this.
With manual detergent dispensing,
the detergent will clump together if
the detergent compartment is not dry
and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid detergents.
These can leak out.
Danger to health due to deter-
gent.
To prevent children coming into con-
tact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
timer.
Activating the timer
Open the door.
Switch the dishwasher on with the
button.
Select the programme you want to
use.
Press the Timer button.
The most recently set “Start in” time will
be shown on the display. The Timer
indicator light will light up.
Set the required time after which the
programme should start automatically
using the buttons.
Pressing and holding buttons or
will automatically adjust the time.
Confirm with OK.
Close the door.
To Next Page
Loading...
Need help?
General
