Miele G 7150 - Fault Messages and Indicators

Problem solving guide
80
Fault messages
Problem Cause and remedy
The optical in-operation
indicator light is flash-
ing quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem:
 Switch the dishwasher off.
Fault FXX There may be a technical fault.
 Switch the dishwasher back on after a few
seconds.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a tech-
nical fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call the Miele Customer Service Department.
Waterproof The Waterproof system has reacted.
 Switch the dishwasher off.
 Close the stopcock.
 Call Miele Service.
Fault F78 Circulation pump fault.
 Switch the dishwasher off.
 Switch the dishwasher back on.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a tech-
nical fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call the Miele Customer Service Department.