Unsatisfactory washing result
Problem Possible cause Remedy
The dishes are not
clean.
The dishes were not loaded
correctly.
See notes in "Loading the
dishwasher".
The programme was not
powerful enough.
Select a more intensive
programme. See
Programme chart.
There is some stubborn
soiling although most of the
crockery is only lightly soiled
(e.g. with tea stains).
Use the "Adjust Sensor
wash" function (see
"Additional functions").
Not enough detergent was
dispensed.
Use more detergent, or
change your detergent.
Items are blocking the path
of the spray arms.
Rearrange the items so that
the spray arms can rotate
freely.
The filter combination in the
base of the wash cabinet is
not clean or is not correctly
fitted.
This may cause the spray
arm jets to get blocked.
Clean and/or fit the filter
combination correctly. Clean
the spray arm jets. See
"Cleaning and care".
The non-return valve is open
and blocked. Dirty water has
flowed back into the wash
cabinet.
Clean the drain pump and
the non-return valve. See
"Maintenance - Cleaning the
drain pump and non-return
valve".
Smearing appears
on glassware and
cutlery, there is a
bluish sheen on
the surface of
glassware; film
can be wiped off.
The rinse aid dosage is set
too high.
Reduce the dosage. See
"Before using for the first
time - Rinse aid".
Problem solving guide
60
To Next Page
Loading...
Need help?
General
