Programme options
58
Delay start
You can set the start time for a
programme, e.g. to take advantage of
night time electricity tariffs. The start
time can be delayed between 30
minutes and 24 hours.
The delay period is shown in 30-minute
increments for a delay period between
30 minutes and 9 hours 30 minutes. It is
shown in hours for periods longer than
this.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
Do not use liquid detergent when
selecting Delay start, as it can run
into the dishwasher before it is
required.
To prevent children coming into
contact with dishwasher detergent:
Add the detergent immediately
before starting the programme, i.e.
before activating Delay start by
closing the door.
Open the door.
Switch the dishwasher on with the
button.
Select the programme you want.
Press the button.
The last Delay start time used will
appear in the display. The Delay start
indicator light comes on.
Set the required time using the
button.
If you keep the button pressed in,
the time will increase automatically up
to hours. To get back to .hours,
press the button twice.
Close the door.
To Next Page
Loading...
Need help?
General
