The function selector and the touch
controls are used to operate the appli
-
ance.
Function selector
The function selector can be turned
clockwise and anti-clockwise.
"Solo" programmes:
h Microwave
D Fan Heat
E Auto Roast
n Grill
N Fan Grill
Combination programmes:
h + D Microwave + Fan Heat
h + E Microwave + Auto Roast
h + n Microwave + Grill
h + N Microwave + Fan Grill
Automatic programmes:
Q Cooking
P Reheating
N Defrosting
If the function selector is turned away
from "0", the cool air fan will run at a
very low level and the oven interior
lighting will be switched on.
Exception: If a delayed start time has
been programmed, the cool air fan and
oven lighting will remain switched off
until the programmed start time. The
oven lighting can be switched on for
approx. 10 secs. by pressing the "Enter"
touch control.
Touch controls
– to confirm an entry or alteration.
The setting is accepted by the system
and appears in the display.
–
to start a process.
The Start touch control can only be
used when the appliance door is shut.
–
to interrupt a process which has al
-
ready started,
–
to delete a setting which has been
selected,
–
to cancel the door locking function (a
microwave feature).
Operation - Controls
25
Stop/
C
Start
To Next Page
Loading...
Need help?
General
