To re-fit the oven door
Carefully locate the door over the
hinge guides.
Make sure that the door goes back
on straight.
Open the door fully.
Flip the locking clamps back up
again.
It is essential that the locking
clamps are flipped up when the
door is re-fitted after cleaning.
Otherwise on closing the door it
could work itself loose from the
hinge guides and this could result
in damage to the door.
To remove the runners
Make sure the oven heating ele-
ments are switched off and cool to
avoid the danger of being burnt.
Pull on the fixing knob to release it.
Take the runners out of the oven.
Reassemble in the reverse order, care-
fully ensuring all parts are correctly in
place.
Cleaning and care
54
To Next Page
Loading...
Need help?
General
