To remove the catalytic side panels
(depending on model)
Make sure the oven heating ele-
ments are switched off and cool to
avoid the danger of being burnt.
Take out the runners.
Gently lift and pull out the catalytic
side panels.
Reassemble in the reverse order, care-
fully ensuring all parts are correctly in
place.
When reassembling the catalytic side
panels, ensure they sit correctly.
Ease the back lug into the opening
in the rear wall panel.
Lift the front locating hole on to the
guide pin behind the collar.
Cleaning and care
55
To Next Page
Loading...
Need help?
General
