A Start time (11:45) will show in the
display, when you call up the f
symbol.
The oven will start heating up at this
time and the duration will then be
displayed.
Once the time set has elapsed, the
oven will switch itself off automatically.
Please note the following:
In addition to the options given, you
can also enter the beginning and end,
or just the end, using the appropriate
symbols.
To check and change an
entered time
It is possible to check or change times
entered for a cooking process, at any
time by calling up the relevant symbol.
To delete a time entered
^
Turn the programme selector to "0".
If there is a power cut all data entered
will be deleted.
Using the residual heat,
Energy-save function
If you have entered times for a cooking
programme, the oven heating will
switch off shortly before the end of the
time set.
The residual heat in the oven is
sufficient to complete the cooking
process.
Using the residual heat in the oven
saves energy.
"EC" will appear in the display to show
that the oven is in energy save mode.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting was
chosen.
Programming cooking times
35
To Next Page
Loading...
Need help?
General
