Miele H 344-2 B - Removing Catalytic Panels and Roof Liner

To remove the catalytic enamelled
back panel, side liners (if fitted) and
roof liner
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
The catalytic panels and liners can be
removed for cleaning if necessary.
See "Cleaning and Care" for more
information.
– Back panel
^ Remove the runners.
^
Loosen the screws in the back panel
and take it out.
The oven must not be used without
the back panel fitted. This could
cause considerable injury.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
– Roof liner
^
Remove the runners.
^
Lower the top heating element.
^
Hold the roof liner firmly and unscrew
the knurled knob.
^
Take out the roof liner.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
– Side liners
(depending on model)
^ Remove the runners.
^
Lift the side liners up slightly before
removing them.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Cleaning and care
64