Sensors
The electronic sensors around the
display react to touch.
An audible tone will sound each time a
sensor is pressed. You can deactivate
this, if wished (see "Changing oven
settings - Buzzer tones")
C
These sensors are used to call up
options marked with a dot ß in the
display.
s
Touching this sensor switches the
appliance on and off.
l
This sensor is used to enter a time
for the minute minder.
+ C
This sensor is used to cancel an
entry.
Display
ß
The dot symbol appears next to an
option or a command such as
"Continue".
You can select the entry by touching
the sensor beside the dot.
The display shows a maximum of
three options.
p
Arrows in the display indicate if more
than three options are available.
Touch the sensor on the right hand
side of the arrow to scroll to the other
options.
- - - - - - -
A dotted line will appear under the
last option available.
+ and -
will appear when a time or
temperature entry is required.
The numerical key pad will light up at
the same time.
L
A tick will appear beside the option
which is currently selected.
Controls
16
To Next Page
Loading...
Need help?
General
