To dismantle the oven door
The oven door is made up of four
panes of glass and has vents at the top
and bottom.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
When cleaning the glass panes
please follow the same instructions
given for cleaning the appliance
front.
Do not use abrasive cleaning
agents, sponges or brushes, as
these can scratch the surface.
Scratches can also cause the glass
to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
Ensure that the glass panes are
inserted the correct way round after
cleaning, as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a thick table cloth or a towel).
Always remove the oven door before
dismantling it.
^
Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should just overhang
along the edge of the table so that
the glass lies flat to prevent it from
getting broken during cleaning.
^ Flip the glass pane retainers
outwards to open them.
Cleaning and care
55
To Next Page
Loading...
Need help?
General
