Main menu
You can change the order in which
options appear in the main menu. Up to
three options can be placed at the
beginning of the main menu (excluding
Settings).
When you select this option you will be
prompted to set positions 1, 2 and 3.
You will be given the choice of
selecting a standard oven function or
an Automatic or a User defined
programme for each position. After
selecting and confirming one position
you will be prompted to set the next
one.
Once you have set all three the list will
appear in the display.
If you have already set a programme of
your choice at the beginning of the
main menu (see "User programmes -
Use in main menu"), the next one will be
added to the list.
Catalyser
ß
On
(Factory default)
The catalyser is always switched on.
ß
Off next prog. only
The catalyser will be switched off for
the next programme only.
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
ß
Sensor controlled
(Factory default)
The auto sensor will switch off the
cooling fan.
ß
Temperature controlled
The cooling fan will switch off when
the temperature in the oven
compartment drops below approx.
70 °C.
ß Time controlled
The cooling fan will switch off after
approx. 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can
– damage the housing
unit/worktop.
– lead to corrosion in the oven.
Settings
49
To Next Page
Loading...
Need help?
General
Weight and Dimensions
