Oven controls
In addition to operating the various
cooking programmes to bake, roast
and grill the controls also offer the
following:
–
a time of day display,
–
a minute minder,
–
a timer to automatically switch
cooking programmes on and off,
–
settings that can be customised.
Safety features
System lock
The system lock 0 prevents the oven
from being used unintentionally by
children, for example. See "System
lock".
Safety switch-off
Safety switch-off is triggered
automatically if the oven is operated for
an unusually long period of time.
The period of time will depend on the
particular oven function being used.
The oven will switch off automatically
and "Fault 55" will appear in the display.
The oven can be used again immedi
-
ately after switching it off and back on.
Cooling system
A cooling fan will come on
automatically when a cooking
programme is started. The cooling fan
mixes hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently the cooling fan will
switch off automatically.
Door lock for pyrolytic operation
At the beginning of a pyrolytic cleaning
programme the door will lock for safety
reasons. The door lock will only be
released after the temperature in the
oven has dropped again below 280 °C.
Pyrolytic cleaning
The oven interior can be kept clean by
using the Pyrolytic function, see
"Pyrolytic cleaning ^"
The appliance will heat up to over
400 °C during this cleaning process.
Any residual soiling is burnt off by the
high temperatures.
See "Cleaning and care" for more
information.
Features
13
To Next Page
Loading...
Need help?
General
