If you touch the Popcorn sensor Æ the
microwave oven will start with a set
power level and duration.
The power level is pre-set at 850 W and
the duration at 3 minutes. This is
suitable for most brands of microwave
popcorn.
The duration can be changed up to a
maximum of 4 minutes. The power level
cannot be changed (see "Settings –
Popcorn").
This function can only be used when
no other cooking programmes are in
use.
^
Touch Æ until the cooking process
begins.
The time remaining will appear in the
display.
You can interrupt the programme at any
time by touching "Stop" and then the #
sensor.
Do not leave the oven unattended
during this programme and make
sure you follow the instructions on
the packaging.
At the end of the programme
– "Process finished" will appear in the
display,
– a buzzer will sound if the buzzer
volume has been set (see "Settings -
Buzzer tones").
Popcorn Æ
79
To Next Page
Loading...
Need help?
General
