Factory default
All settings can be reset to the factory
default.
^
Open the door.
^
Turn the dishwasher off o.
^
Press the program button and at the
same time turn the dishwasher on g.
Hold the program button until the
lower right program indicator comes
on.
If it does not come on, start over.
^
Press the program button 12 times.
The "Intake/Drain" indicator flashes
once long and twice short in intervals.
The upper right program indicator
shows if a setting was changed.
–
The upper right program indicator
flashes:
All settings are the factory default.
–
The upper right program indicator is
off:
At least one setting was changed.
^
To change the setting, press the
program button until the
"Intake/Drain" indicator lights.
^
Press the program button briefly
three times.
The setting is saved.
^ Turn the dishwasher off o.
Additional functions
29
To Next Page
Loading...
Need help?
General
