The appliance is supplied with the door
hinged on the right. If left hand door
hinging is required follow the instruc
-
tions below.
Appliance door
^ With the appliance door closed un-
screw hinge bracket b and then take
the door down and off.
^
Take washer d and hinge pin c out
of the hinge bracket, and refit them in
the second hole in the hinge bracket.
^
Unscrew upper hinge pin e and refit
it on the other side.
^
Remove cover a and use it to plug
the holes on the other side.
^
Take stopper g out of the door bear
-
ing bush and refit it on the other side.
^
Fit door handle f on the other side.
^
Fit the appliance door onto upper
hinge pin e and then close the appli
-
ance door.
^
Fit lower hinge pin c together with
hinge bracket b into appropriate
hole on the underside of the appli
-
ance door and then securely screw
the hinge bracket to the housing.
^ Align the appliance door using the
long slots in the hinge bracket before
tightening all screws.
Changing the door hinging
32
To Next Page
Loading...
Need help?
General
