Freezer compartment door
^
Unscrew bearing block a and take
off the freezer compartment door b
together with the hinge plate.
^ Fit the bearing block onto the upper
pin in the freezer compartment door
c, and turn the freezer compartment
door around so that the bearing
block is underneath.
^ Unscrew door closing catch d.
^
Turn it around 180°, and refit it on the
opposite side e.
^
Fit the freezer compartment door in
position at the top f, then tighten the
bearing block securely g.
^
Plug the holes with stoppers h.
Changing the door hinging
34
To Next Page
Loading...
Need help?
General
