Miele K9552 User Manual

Moving the shelves
The shelves can be adjusted according
to the height of the food.
^
Raise the shelf, pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Push the rear half of the glass shelf
up slightly from below.
^
At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
To move the split shelf:
^
Take both halves of the split glass
shelf out,
^
fit the two brackets onto the supports
on either side at the required height,
^ and push the glass shelves in one
after the other. The shelf with the
raised edge must be at the back.
Fruit and vegetable containers
on roller insert
(depending on model)
The fruit and vegetable containers are
pushed in and out on rollers, and can
be completely removed if necessary.
The roller inserts can also be removed
for cleaning.
Adjusting the interior fittings
22

Miele K9552 Specifications

General

Brand	Miele
Model	K9552
Category	Refrigerator
Language	English