Fruit and vegetable containers
on telescopic runners
(depending on model)
The fruit and vegetable containers are
pushed in and out on telescopic
runners, and can be completely
removed if necessary.
^
Pull the container right out and then
lift it up and off.
Push the runners back in again to
avoid injury or damage.
To replace a container,
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the container b.
^
Then push the container back in c.
Adjusting the condiment
tray/bottle shelf
^
Lift the tray/shelf up and out of the
stainless steel frame to remove.
^
Push up the stainless steel frame,
and remove.
^
Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^
Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
Adjusting the interior fittings
23
To Next Page
Loading...
Need help?
General
