Installation
*INSTALLATION*
47
Securing the covers
Before the cover can be installed
in the gap above the refrigeration ap-
pliance, it must be assembled as fol-
lows:
Insert the two parts of the cover into
one another.
Cover viewed from the side
Place the assembled cover into
the gap above the refrigeration appli-
ance so it clicks into place. While do-
ing so, slide both parts of the cover
together as required.
Installing the cover in a side-by-side
combination
Insert the joining peg (from the side-
by-side installation kit) halfway into
the channel in the cover for the left-
hand appliance.
Place the second cover onto the join-
ing peg and press the two covers to-
gether.
Click the two covers together into the
gap above the refrigeration appli-
ances.
To Next Page
Loading...
