Adjusting the interior fittings
99
Removing the dividing panel (de-
pending on the model)
The dividing panel in the freezer basket
can be removed for cleaning:
The dividing panel is secured to the
freezer basket with brackets.
Pull the freezer basket out as far as it
will go.
To release the brackets, use a suit-
able object to turn the slots in the
pegs to a horizontal position(1.).
Remove the pegs from the brack-
ets(2.).
Pull the dividing panel upwards to re-
move it.
To reinsert the partition wall, place
the brackets in an upright position,
and position the dividing panel into
the brackets so that you hear it click
into place.
Insert the pegs into the brackets, and
use a suitable object to turn the slots
in the pegs into a vertical position.
Push the freezer basket all the way
back in.
Removing the ice cube tray
The ice cube tray can be removed for
cleaning:
Open the lower appliance door as
wide as possible.
Tilt the ice cube tray forwards and
pull it up and out to remove it.
Ice cube production does not stop
when the ice cube tray has been re-
moved. Ice cubes can fall into the
freezer basket underneath.
Only remove the ice cube tray for the
shortest time possible or switch off
the Ice Maker beforehand (see
“Switching off the Ice Maker” in
“Making ice cubes”).
To Next Page
Loading...
Need help?
General
