Guide to the machine
13
Finger guard
The finger guard is a safety feature that must be checked daily for proper function before
the machine is used.
Every time the ironer is switched on, check the function of the finger guard.
Activate the finger guard once while the symbol is flashing.
If fingertips become trapped between the roller and the finger guard, the ironer will be
stopped immediately and the heater plate disengaged. At the same time, the symbol will
light up continuously. Press the button to switch the ironer back on.
The finger guard remains non-operational while the roller is running backwards.
Do not use the finger guard intentionally to switch off the ironer while it is operating.
Always switch off the ironer by pressing the button.
To Next Page
Loading...
Need help?
General
