Miele PT 7801 User Manual

Operating data
Operating data can be read or deleted
before a program starts or after it finishes.
1 Hot W. / Cot. extra dry 0%
2 Hot Wash / Cottons dry 0%
3 Hot Wash / Cottons moist 20%
\FCA
^
Press the \ "Operating data" button.
Operating data module
Total data
Program data e
\ A
Selections
–
Total data shows all data collected and
added up from all programs.
– Program data are the data which are
recorded during a program.
– Delete data
a. Module (delete all data and program data)
b. Total data (delete only data totals)
c. Program data (delete program data only)
^ Press \ "Operating data" again to
deselect the function.
Full operating data memory
When the memory in the operating data is
full, the display shows, after pressing the h
"Start" button, that the operating data will be
overwritten.
If the data should not be overwritten
^
Press the A "Back" button or do nothing.
The display will go back to the program
selection.
If the data should be overwritten
^
Press the h "Start" button.
Total data
Operating data module
Total data
Program data e
\ A
The display shows the following when "Total
data" is selected:
Operating data module ~ Total data
Total operating time: 200 987 hr
Operating hours: 123456 hr e
\ A
Additional selections
Total operating time: 200,987 hr
Operating hours: 123,456 hr
Active time heating: 73,456 hr
Active time motor: 93,456 hr
Program starts: 23,456
Program stops: 567
Program cancellations: 67
Load size: 1,234,567 lb
Energy: 12,345,678 kWh
Optional modules
20

Miele PT 7801 Specifications

General

Brand	Miele
Model	PT 7801
Category	Dryer
Language	English