Fault messages
,
Repairs to electrical, gas or steam
appliances should only be carried out by
a Miele authorized technician in
accordance with local and national safety
regulations. Unauthorized repairs could
cause injury or machine damage. The
manufacturer cannot be held responsible
for unauthorized work.
After turning the machine on at the mains or
if the program list was selected the control
carries out a system analysis. All modules
and their sensors, data from the operating
system, drying programs and languages are
checked.
If an error occurred in a program or
language, they are marked with § and can
not be selected (here "3 Hot Wash / Cottons
20%" or "English").
1 Hot W. / Cot. extra dry 0%
2 Hot Wash / Cottons dry 0%
3 Hot Wash / Cottons moist 20% §
f
Settings Back <-
Language Deutsch
English§
FC A
If an error occurs in an already selected
language the following will show:
§
Data fault
Limited function.
Language defect.
f
Faults that occur before or after the start of a
program will flash in the display.
If the following error messages cannot be
fixed with five restarts, a general message
will show:
§
System fault
Call Technical Service if machine
does not start after power failure.
f
Frequently asked questions
23
To Next Page
Loading...
Need help?
General