Display Service interval
^
Call Technical Service for maintenance if
the display shows the following message
after turning the machine on.
§
Service interval 1
Call the Miele Service Department.
A
The display goes out after 5 seconds.
Fault messages
,
Repairs to electrical or steam
appliances should only be carried out by
a Miele authorized technician in
accordance with local and national safety
regulations. Unauthorized repairs could
cause injury or machine damage. The
manufacturer cannot be held responsible
for unauthorized work.
Faults that occur before or after the start of a
program flash in the display.
If the display remains off, the dryer has no
power.
^ Check the plug, main switch and fuses
on-site.
y
Power failure
Program stop
Press Start.
f
^
Press h "Start".
This fault message can also indicate that the
overload cut-out of the drive motors has over
heated.
^
Allow the motor to cool.
Frequently asked questions
32
To Next Page
Loading...
Need help?
General
