Cleaning the fluff filter
The fluff which is created by the
drying process is collected in the fluff
filter in the door. Clean the filter after
every drying cycle.
^ Open the door and pull the fluff
filter (1) out of the door as illustrated.
^
Use your fingers to remove the fluff
from the surface of the filter.
^
Remove any fluff from the hollow part
of the door holder.
A cleaning brush is available as an
optional extra from your Miele dealer
or the Miele Spare Parts Department.
You can also use a vacuum cleaner.
^
Also clean the door seal (2) with a
damp cloth.
If there is a great deal of compacted
fluff on the filter, it can be cleaned
under running water.
^ After cleaning shake thoroughly until
no more water droplets are visible.
^ Dry the filter carefully.
^ Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way. Close the door.
Cleaning and care
21
To Next Page
Loading...
Need help?
General
