b Venting system with plastic
piping
Plastic piping is a good option where
the vented air has to ducted for some
distance. The smooth walls of the
pipe create less friction for the
vented air than the walls of a flexible
vent hose, for example. Time and
energy consumption are better with
plastic piping.
The following items are required:
–
An adapter* (C 100 mm).
– a wall vent kit* or window vent kit*.
– Suitable piping (C 100 mm) is
available from your dealer or builders
merchants. Where the pipe diameter
is more than 100 mm, an adapter is
necessary (e.g. from C 100 to 125
mm) to connect the pipe to the dryer.
* Available as an optional accessory
from your Miele dealer or the Miele
Spare Parts Department.
^
The ducting (2) is connected to
adapter (1) which is fitted into the
vent opening on the dryer.
Example
1. Wall vent kit
(Separate fitting instructions are
supplied with the Miele wall vent kit).
2. Adapter
3. Plastic piping, diameter DN 100
Installation - venting
39
To Next Page
Loading...
Need help?
General
