Standby
To save energy, the display goes out after 10 minutes and
the
Start
button flashes slowly.
There are two options:
Active
(the machine is delivered with this option selected)
Standby is activated:
–
if a programme is not selected after the machine has been
switched on.
–
after the
Start
button has been pressed.
–
at the end of a programme.
Not in current programme
Standby is activated:
– if a programme is not selected after the machine has been
switched on.
Operating the multi-function selector or one of the short cut
buttons switches the display back on again.
A tick
L will appear beside the option to show that it has
been set.
Settings menu J
58
Miele{home
This setting does not apply to this model.
To Next Page
Loading...
Need help?
General
