Altering a programme
Once a programme has started, no
changes to the programme or addi-
tional options will be accepted.
If the programme selector is turned to
a different programme after a pro-
gramme has begun, the “Drying” indi-
cator light will flash. The programme
originally selected will continue to run
as normal. The indicator light will go
out when the selector is returned to its
original position.
To cancel a programme
Open the door or switch off the ma-
chine.
To select a different pro-
gramme
Turn the programme selector to “Fin-
ish”.
– The “Anti-crease/Finish” indicator
light will flash by itself to indicate that
the programme has been cancelled.
Turn the programme selector to the
drying level required.
Switch additional options on or off as
required.
Press the “START” button.
To open the door during a pro-
gramme to add or remove
garments
Cancel the programme by:
Pressing the “Door” button and open-
ing the door.
– Items can now be added or removed
early.
Restart the programme by:
Closing the door.
Pressing the “START” button.
– The programme will restart.
If there is a power cut, TIMED
DRYING programmes have to be re-
started once the power supply is re-
stored.
Altering a programme
15
To Next Page
Loading...
Need help?
General
