EasyManua.ls Logo

Miele T 7634 User Manual

Miele T 7634
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Adjusting the dryer's
electronics for very soft water
,
In some areas of the UK, water is
extremely soft which can affect the
sensitivity of the control electronics.
If the dryer is installed in an area of
very soft water, you should contact
your local water supplier for
information and advice regarding
water hardness and water
conductivity. If the water
conductivity is less than 150 µS, the
following programmable function will
need to be activated.
Important. This programmable
function should not be activated if,
despite the water being extremely
soft (as would be the case if a water
softener were used), its conductivity
is greater than 150 µS.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
The tumble dryer is switched off.
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
ten times.
The Low temperature indicator light
will flash on and off slowly once and
then on and off quickly twice.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Factory default setting
I Adjusted for very soft water
(the Automatic indicator light will also
flash)
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
Programmable functions
60

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Miele T 7634 and is the answer not in the manual?

Miele T 7634 Specifications

General IconGeneral
BrandMiele
ModelT 7634
CategoryDryer
LanguageEnglish

Summary

Warning and Safety instructions

Safety with children

Precautions and guidelines for ensuring the safety of children around the appliance.

Technical safety

Important safety information regarding electrical connection and appliance integrity.

Operating the tumble dryer

Control panel

Overview and explanation of the buttons and indicators on the dryer's control panel.

Notes on laundry care

How to dry correctly

Laundry sorting and preparation

Guidelines for sorting laundry and preparing it for drying.

Programme and Option Selection

How to choose the appropriate programme and additional options.

Starting and Completing the Cycle

Steps to start the drying programme and remove laundry safely.

Programme chart

Cottons programmes

Details for cotton fabric programmes including load and drying levels.

Standard programmes

Information on programmes for hand iron, machine iron, minimum iron, and delicates.

Speciality programmes

Details for woollens, smoothing, automatic, shirts, and denim programmes.

Air programmes

Information on Cool air and Warm air programmes for airing or refreshing.

Changing the programme sequence

Electronic system lock

Cleaning and care

Fluff filter maintenance

Instructions for cleaning the fluff filter after each drying cycle.

Problem solving guide

Fault messages and indicators

Troubleshooting common faults indicated by display messages or lights.

Common operational issues

Solutions for other problems like long drying times or insufficient dryness.

Installation and connection

Installation Location

Guidance on choosing a suitable installation site and moving the appliance.

Machine Levelling and Ventilation

Instructions for levelling the machine and ensuring adequate room ventilation.

Electrical connection

UK Electrical Requirements

Specific electrical connection requirements and safety for UK installations.

Installation - Venting

Duct Length and Diameter Calculation

How to calculate the total duct length and required internal diameter.

Programmable Functions

Related product manuals