Extending the range of the
drying levels
You can extend the range of the
drying levels for many of the
programmes:
Machine iron+
(drier than Machine iron).
Slightly dry
(drier than Hand iron).
Normal+
(drier than Normal).
This programmable function is only
available for programmes with drying
levels.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
eleven times.
–
The Low temperature indicator light
will flash on and off slowly once and
then on and off quickly three times.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Default setting
1 Drying level range extended
(the Automatic indicator light will also
flash).
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
To select the extended drying level
^ Select a programme.
^
Press the drying level button
repeatedly until the following
indicator lights come on.
–
Indicator lights Extra dry and Normal
= Normal+
–
Indicator lights Normal and Hand
iron = Slightly dry
–
Indicator lights Hand iron and
Machine iron = Machine iron+
Programmable functions
62
To Next Page
Loading...
Need help?
General
