Miele T 8433 C User Manual

Memory function
The electronics will memorise the
drying level and any extra options
selected for the current drying
programme.
The Memory function
–
is activated when the machine is
delivered. You can deactivate it if
wished.
–
does not work if a programme is
cancelled or if Delay start has been
selected.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Buzzer button twice.
–
The Buzzer indicator light will briefly
flash on and off six times.
–
P and i (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
i Memory activated
(the Drying indicator light will also
flash)
0 Memory deactivated
E Pressing the Start/Stop button
switches from one to the other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
50

Miele T 8433 C Specifications

General

Brand	Miele
Model	T 8433 C
Category	Dryer
Language	English