Miele T 8433 C User Manual

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The dryer is delivered with the
extended cooling down time option
deactivated. You can extend the
cooling down time by 5 minutes or 10
minutes.
The option of extending the cooling
down time is available with the Auto-
matic, Cottons, Minimum iron/Delicates,
Shirts and Denim programmes.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Buzzer button three times.
–
The Buzzer indicator light will briefly
flash on and off seven times.
–
P and 0 (default settting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 The cooling down time is not
extended (default setting).
i The cooling down time will be five
minutes longer.
(The Drying indicator light will also
flash once).
2 The cooling down time will be ten
minutes longer.
(The Drying indicator light will also
flash twice).
E Pressing the Start/Stop button
switches from one to the other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
51

Miele T 8433 C Specifications

General

Brand	Miele
Model	T 8433 C
Category	Dryer
Language	English