With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To select delay start
A Select the programme you want and
then press the m button.
The indicator light for the m button will
light up.
Delay start 10:00
From: 10:00 to: 11:29
Change Back A
The display shows the start time
(From)
,
the time for the end of the programme
(to)
and the current time of day.
Delay start 10:00
From: 11:01 to: 12:30
Change OK
B Use the left hand
Menu
button under
Change to select the time you want
the programme to end at.
The first press on the button will adjust
the programme end time to the next
half or full hour. Each subsequent
press on the button will delay the
programme end time by 30 minutes.
C Confirm the time you require by
pressing the right hand
Menu
button
under OK.
To begin delay start
D Press the
Start/Stop
button.
Cottons
Start in:
1:01 h
Normal
The delay start time will now count
down in minutes until the start of the
programme.
The drum will turn briefly every hour to
help prevent creasing.
To add laundry after the delay start
time has started counting down
^
Open the door and add the laundry.
^ Close the door and press the
Start/Stop
button.
The delay start time will continue to
count down.
To alter delay start
^ It is possible to change the drying
level after the delay start time has
begun to count down by pressing
one of the
Menu
buttons.
You can also select a later programme
end time once the delay start time has
begun to count down if you wish:
^
Press the m button.
^
Use the left hand
Menu
button under
Change to alter the time you want the
programme to end at.
^
Confirm by pressing the right hand
Menu
button under OK.
To cancel delay start
^
Press the m button.
^
Confirm by pressing the right hand
Menu
button under Delete.
^
To start the programme: Press the
Start/Stop
button.
Delay start
19
To Next Page
Loading...
Need help?
General
